Locks used in Lockout-Tagout procedures to secure energy-isolating devices in a safe position, helping prevent machinery or equipment from being re-energized until the lock is removed by the authorized person.
€31,20
€31,20
€31,20
€31,20
€31,20
€31,20
€31,20
€31,20
€31,20
€23,67
€23,67
€23,67
Safety padlocks are dedicated locking devices used within a Lockout-Tagout (LOTO) procedure to secure energy-isolation devices and help prevent the unintended restoration of hazardous energy during maintenance or servicing.
Unlike general-purpose security padlocks, LOTO safety padlocks are intended to form part of a hazardous energy control system. Depending on the application, they are available in different materials, colours, shackle configurations, and keying systems.
Once the relevant hazardous energy source has been isolated, a safety padlock is applied to the appropriate lockout device or isolation point. For personal lockout, Lockout-Tagout-Shop describes the commonly applied principle of one employee = one padlock = one key.
The padlock remains associated with the isolation while the authorized person performs the work. Safety padlocks can also be incorporated into group lockout arrangements, where multiple workers need to maintain individual control over the same isolation process.
The appropriate padlock depends on the working environment, isolation point, electrical considerations, required shackle dimensions, identification system, and key-management requirements.
Different materials provide different characteristics:
Nylon and composite padlocks are available for applications where lightweight construction and insulating properties may be required.
Aluminium padlocks provide a lightweight, corrosion-resistant option and are available with different shackle materials and heights. Anodized aluminium also provides permanent colour identification without relying on a painted surface.
Composite-covered aluminium padlocks combine an aluminium lock body with a plastic cover and are available in different colours and configurations.
The material should therefore be selected according to the actual environmental and electrical requirements of the application rather than colour or appearance alone.
The keying system determines how individual safety padlocks are operated and managed.
Keyed Different (KD)
Each padlock has its own unique key. This configuration is commonly used for personal LOTO padlocks where individual control of the lock is required.
Keyed Alike (KA)
Multiple padlocks can be operated using the same key. Lockout-Tagout-Shop notes that this can be useful where one employee needs multiple locks or within certain group lockout arrangements.
Master Key Systems
A master key can provide controlled access across a defined group of locks. Master-key systems are available with both keyed-different and keyed-alike configurations. Their use should be defined within the organization’s LOTO and key-management procedure.
Colour coding provides a visual identification method within a Lockout-Tagout program. Organizations may use different colours to distinguish personnel, departments, contractors, lock functions, or other internally defined categories.
There is no universal LOTO padlock colour code that assigns one mandatory meaning to every colour. Organizations can therefore establish their own colour system according to their procedures, provided the system is clearly defined and consistently applied.
Colour coding can also be combined with laser engraving to identify information such as employee names, departments, lock numbers, or key codes.
For workplaces within OSHA’s jurisdiction, 29 CFR 1910.147 — The Control of Hazardous Energy (Lockout/Tagout) establishes requirements for lockout and tagout devices.
Among other requirements, energy-control devices must be durable, standardized, substantial, and identifiable. Lockout and tagout devices must also be used exclusively for controlling hazardous energy and not for unrelated purposes.
When selecting padlocks for an OSHA-based LOTO program, the complete energy-control procedure and applicable requirements should therefore be considered rather than selecting a lock based only on its physical dimensions or colour. Lockout-Tagout-Shop provides additional guidance on these selection considerations.
Before choosing a safety padlock, consider:
Application – personal, equipment or group lockout requirements.
Keying system- keyed different, keyed alike or master-keyed.
Material – nylon/composite, aluminium or another appropriate construction.
Shackle – required material, diameter and clearance for the isolation point.
Environment – temperature, chemicals, corrosion, moisture and other site conditions.
Identification – colour coding and engraving requirements.
Electrical hazards – determine whether insulating/non-conductive characteristics are required.
Lockout-Tagout-Shop offers safety padlocks from manufacturers including ABUS, Brady and Master Lock, with multiple materials, colours, shackle configurations and keying options.
The appropriate safety padlock depends on your LOTO procedure, keying requirements, isolation points, working environment, and identification system.
Explore our Safety Padlock range to compare materials, colours, shackle options and keying systems for your Lockout-Tagout application.
A LOTO safety padlock is intended specifically for hazardous energy control and forms part of the organization’s Lockout-Tagout system. Selection should account for identification, durability, key control and the environmental conditions in which the lock will be used.
With Keyed Different (KD), each padlock has an individual key. With Keyed Alike (KA), multiple padlocks can be opened using the same key. Both configurations can also be incorporated into master-key systems.
There is no universal colour assignment for LOTO padlocks. Organizations can establish colour-coding systems to differentiate functions, personnel or departments, provided the system is clearly defined and consistently implemented.
The choice depends on the application. Aluminium, nylon/composite and other constructions provide different characteristics relating to weight, corrosion resistance, electrical properties and environmental resistance. The padlock should be selected according to the actual isolation point and operating environment.
Yes. Selected safety padlocks can be permanently laser engraved to support identification and organization. Examples include an employee or department name, lock number, or key code.
One of our sales engineers will be happy to help you in person.
Fill out the form, or call +31 (0)10 8224400
Een van onze sales engineers helpt je graag persoonlijk verder.
Vul het formulier in, of bel naar +31 (0)10 8224400