Safety sensors for position monitoring of machine guarding, available in magnetic, RFID, OSSD and ATEX versions. Suitable for applications up to PL e and SIL 3.
Safety sensors are used to monitor the position or status of guards, doors and covers on industrial machinery. When an access point is opened or not correctly closed, the sensor sends a signal to the safety controller, which stops hazardous motion. Depending on the design and integration, safety sensors can be used in safety functions up to PL e (EN ISO 13849-1) and SIL 3 (EN 62061).
Safety sensors are used to monitor access to, for example:
They provide an effective solution for process monitoring and access control without a mechanical locking mechanism.
Magnetic safety sensors
Magnetic safety sensors consist of a sensor and a coded magnetic actuator. They are compact, easy to install and resilient to dirt and vibration. These sensors are suitable for standard applications with limited tampering risk.
RFID safety sensors
RFID safety sensors provide a higher level of protection through uniquely coded actuators. Only the original actuator is recognised, which prevents bypassing and supports compliance with EN ISO 14119. They are used in applications where increased tamper resistance and high coding are required.
OSSD safety sensors
Safety sensors with OSSD outputs (Output Signal Switching Device) can be connected directly to safety relays or safety PLCs without additional monitoring units. They simplify installation, provide high fault detection coverage and are suitable for safety functions up to PL e / SIL 3.
ATEX-certified safety sensors
For use in potentially explosive atmospheres (zones 1/21 or 2/22), ATEX-certified safety sensors are available. These devices are designed according to ATEX 114 and IECEx and are suitable for gas and dust explosion risks. They combine safe position detection with explosion-proof construction.
High-coded safety sensors, such as RFID versions, recognise only the designated actuator and ignore generic magnets or non-approved actuators. This prevents bypassing of the safety function and increases the functional integrity of the safety system in line with EN ISO 14119.
Many safety sensors are available with housings rated to IP67 or IP69K. This ensures resistance to moisture, dust, vibration and cleaning agents, making them suitable for:
For hygienic applications, variants with stainless steel housings or smooth, closed surfaces are available.
Safety sensors are particularly suitable for applications where:
Depending on the environment, required coding level, safety performance and installation layout, different sensor technologies may be appropriate. Our safety specialists can help you select the right sensor solution based on applicable standards, environmental conditions and integration into your overall safety control system.
One of our sales engineers will be happy to help you in person.
Fill out the form, or call +31 (0)10 8224400
Een van onze sales engineers helpt je graag persoonlijk verder.
Vul het formulier in, of bel naar +31 (0)10 8224400